Battery Chargers


•1,200 Watts - 9 Amps
•Advanced high frequency switching design with 92% efficiency.
•Fully sealed enclosure provides protection from harsh environments.
•Internal CPU employs advanced charging management algorithm.
•Automatic internal temperature safety shut-off system(shuts down when temps reach 85°C.)
•Memory to store 10 unique algorithms, and tools to load new algorithms.
•Add $100 for Lithium Can Bus
Please Specify Output Voltage Volts

  Elcon PFC1500  $520.00
  Elcon PFC1500 including lithium can bus interface  $620.00

•2,000 Watts - 13 Amps
•Advanced high frequency switching design with 92% efficiency.
•Fully sealed enclosure provides protection from harsh environments.
•Internal CPU employs advanced charging management algorithm.
•Automatic internal temperature safety shut-off system(shuts down when temps reach 85°C.)
•Memory to store 10 unique algorithms, and tools to load new algorithms.
Please Specify Output Voltage Volts

  Elcon PFC2500  $790.00
  Elcon PFC2500 including lithium can bus interface   $890.00

•2,200 Watts - 20 Amps
•Advanced high frequency switching design with 92% efficiency.
•Fully sealed enclosure provides protection from harsh environments.
•Internal CPU employs advanced charging management algorithm.
•Automatic internal temperature safety shut-off system(shuts down when temps reach 85°C.)
•Memory to store 10 unique algorithms, and tools to load new algorithms.
Please Specify Output Voltage Volts

  Elcon PFC3000  $990.00
  Elcon PFC3000 including lithium can bus interface  $1,090.00

•120 Volt input
•15 Amp output
•Advanced high frequency switching design with 92% efficiency.
•Fully sealed enclosure provides protection from harsh environments.
•Internal CPU employs advanced charging management algorithm.
•Automatic internal temperature safety shut-off system(shuts down when temps reach 85°C.)
•Memory to store 10 unique algorithms, and tools to load new algorithms.
•14.1" x 13.75" x 5.26"
Please Specify Output Voltage Volts

  Elcon PFC4000  $1,360.00
  Elcon PFC4000 including lithium can bus interface  $1,460.00

Nowadays the most challenging technology issue for most Lithium battery suppliers is not discharge control, but control of charging.

We offer a unique and impressive charger with a built-in balancing function. This premium charger will charge and balance each single cell separately and thus can prolong the life for each battery. It can be customized to support battery pack total voltages ranging from 12v through 400v. It also can operate in a range 2AMP-50AMP draw depending on whether you require a 110v or 220v source for the charger. Generally the chargers are designed for 110v AC when the charger is less than or equal to 1800 watts.

With these chargers the internal balancing function automatically controls the charging and balancing. Each battery cell matches a LED light which is an indicator of charging conditions. When power on, all the lights are bright. The lights display different colors red, yellow, and green to indicate the charging conditions. It makes sure each single is cell fully charged and well balanced within the pack, and prevents any of the cells from overcharging. Without the equalization, cells become unbalanced after some cycles, their consistency is damaged and they can be easily to be overcharged or discharged. With this system, you will never need to worry about this problem! We provide the highest edge of technology and this technology will benefit your whole battery system for a very long time.


  72V8A-10A  $195.00
  72V25A-32A  $898.95
  84V8A  $195.00
  84V13A  $434.85
  84V15A-18A  $567.45
  84V25A-28A  $898.95
  96V8A  $195.00
  96V15A-16A  $567.45
  96V25A  $898.95
  120V15A  $898.95
  120V25A-26A  $1,134.90
  144V15A-16A  $898.95
  144V25A-27A  $1,577.55
  288V15A-17A  $2,145.00
  288V25A-28A  $3,784.95
  300V5A  $567.45
  300V15A-16A  $2,145.00
  336V15A-19A  $2,776.80
  360V10A-11A  $1,577.55

$1,115.00

Technical Characteristics This battery charger features state-of-the-art high frequency technology. • 240/115VAC • 15 Amps at 144 Volts • Adaptable to every use and very flexible.
• CE certified.
• Metal case base and ABS cover.
• Coated printed circuit boards.
• Chargers are all microprocessor-controlled and internally protected against overload, short circuit, incorrect connection and voltage transients.
• With an internal selector switch the chargers can adapt to every type of battery.
• Increased battery life and reduction of water usage.
• Chargers operate at 85-90% efficency for maximum savings of electric power cost.
With the Thermal sensor option, the charger's output electronically compensates for temperatures ranging from 0° to 50°.
• Operating temperature from -20° to +50°.
• Weight and size are minimized.




Quantity   

Place one balancer across the terminals of each battery to keep the charge voltage constant, and reduce gassing.



  Battery Bypass Charging Balancer - 12 Volt Battery 14"  $11.00 Quantity   
  Battery Bypass Charging Balancer - 8 Volt Battery 8"  $16.60 Quantity   
  Battery Bypass Charging Balancer - 6 Volt Battery 8"  $16.00 Quantity